HIFU Machine High intensity focused ultrasound face lifing wrinkle removal face tightening and body slimming U-FU4.52S
Type:Anti-wrinkle Machine,anti-wrinkle machine,hifu
Feature:skin tightening,wrinkle removal,face lifting,body slimming
Operation system:high frequency
Application:Face lift, wrinkle removal
Applicable people:all ages
Input Voltage:AC 100V-230V
High Intensity Focused Ultrasound (HIFU) directly delivers heat energy to skin and subcutaneous tissue that can stimulate and renew the skin’s collagen and thus consequently improving the texture and reducing sagging of the skin. It literally achieves the results of a facelift or a body lifts without any invasive surgery or injections, moreover, an added bonus of this procedure is that there is no downtime.
This technique can be applied to the face as well as the whole body, and also, it works equally well for people of all skin colours, in contrast to that of lasers and the intense pulse lights.
13MM FAT REMOVAL
Apply high intensity focused ultrasound, generate focused energy and go deeoer into the cellulite to break cellulite. it is an invasive, impressive and long- last effective tratement to reduce fat, especially for abdomen and thigh.
High intensity focused ultrasound target at fat of 13mm(depth of penetration), heating up the fat tissue, combine with high energy and good penetration to resolve the fat, during the treatment, the triglyceride and fatty acid excrete by the process of metabolism, and the vessal and nurve will not be damaged.
1. DS-4.5D 4MHZ frequency used to transmit high- energy focused ultrasound to the skin, subcutaneous tissue, the ultrasound to penetrate the skin to a depth of 4.5mm, direct subcutaneous SMAS layer, forming “heat coagulation” regional, targeted to thicker skin, such as cheeks, etc.
2. DS-4.5S 7MHZ frequencies used to transmit high-energy focused ultrasound to the skin, subcutaneous tissue, the ultrasound to penetrate the skin to a depth of 4.5mm, direct subcutaneous SMAS layer, targeted to thinner skin, such as the forehead, thin and neck.
3. DS-3.0 for transmitting high frequency of 8 MHZ focused ultrasound energy into the dermis layer of the skin tissue,the ultrasound to penetrate the skin to a depth of 3.0mm,is responsible for activating the skin’s dermal layer of collagen,effectively enhance the effect of the consolidation of the outline,but also improve large pores and reduce the appearance of wrinkles.
4. DS-1.5 10MHZ frequency used to transmit high-energy focused ultrasound to the epidermis tissue,the ultrasound to penetrate the skin to a depth of 1.5mm,is responsible for activating the skin epidermis in thinner tissue.
5. MAT-13mm high intensity focused ultrasound target at fat of 13 mm(depth of penetration), heating up the fat tissue, combine with high energy and good penetration to resolve the fat.
1. Instead of the traditional surgical face lift with a non-invasive technique.
2. Tighten sagging skin,improve sagging and other signs of aging.
3. With a special transmitter,transmission from the skin surface conduction of high-energy focused ultrasound to the SMAS layer.
4. SMAS contraction : collagen remodeling , elastine fiber contraction.
5. In the skin layer to produce the specified target multiple temperatures above 65-70 degrees in short time or above sonic focus high energy,forming”heat cure” area,the focus cells are solidified,then ablation,fascia speedy improvement,to achieve cosmetic wrinkle effect
6. Non-invasive,no time to rest after surgery,ultrasound without injections,no surgery,no trace wrinkle skin rejuvenation.
7. Fit any age,both men and women.
8. Equipped with a variety of different levels of energy emission transmitter skin,the high-energy focused ultrasound transmitted to the skin layers.
9. Proprietary high-speed transmission technology of 0.1-0.25.
10. Up to 15000 lines of a layered high-precision emitter transmitter is three times that of similar instruments,greatly improving the cost effectiveness.
11. Exclusive development of stable output 4-10MHZ broadband technology that fits well with layered skin treatment technology.
12. Quick & short treatment time : 30 MINS one face treatment.
13. Patients’ high satisfaction.
14. High quality,low consumables.
——————HIFU Treatment procedure———————————
1. Skin cleaning.
2. Take photo and mart the treat skin area.
3. Pt gel as a conductor between the transmitter and the skin.
4. Mark the treating area,such as around the chin,neck,both sides of the plane.
5. A smooth hand piece delivers highly focused ultrasound energy which safely heats up the subcutaneous layer at designated depth. The patient will be asked to feedback on the intensity of heat so that the procedure does not become uncomfortable or painful whilst achieving optimum results.
6. Pay attention to avoid the edge of the chin nerve(marginal mandibular nerve) and supraorbital never(supra orbital never) area.
7. After completion,and no recovery period,can use skincare products and make-up.
8. Just once,the full effect will gradually aprear in 2-3 months time.
9. The results of ultrasound skin tightening and elasticity will be gradual over the following 2 -3 months as the new collagen regenerate.
10. There is no downtime following this treatment. Some patients experience mild redness of the skin, but this is temporary. The results continue to improve for up to 9 months. The results can last for 1 year.
ting up the fat tissue, combine with high energy and good penetration to resolve the fat. Specification
|Input Voltage||AC 100V-230V 50Hz-60Hz|
|Output Power||0.2 to 2.0J (0.1J/STEP)|
|Spacing||1.0 to 10mm (0.5mm/STEP)|
|Focal Length||5.0 to 25mm (0.5mm/STEP)|
|Transducer||DS-4.5D, DS-3.0, DS-1.5,FAT-13|
1. How many transducers come with the machine?
2. How many shots for each tranducer?
3. Treated area?
Eyes, face, neck, chest, body.
4. What’s the package?
Export standard package, wooden case with foams inside.
Do you have any warranty?
Yes, we have. 12 month warranty on host machine is given. Six months free replacement warranty for handles, treatment heads, and parts.
How is your after-sale service?
We have a professional technology supporting team for your timely services. You can get the help you need in time by telephone, webcam, online chat (Google talk, Facebook, Skype). Please contact us once the machine has any problem. Best service will be offered.
Will you teach how to use the machine?
Yes, we can provide a complete user manual and usage video for instruction and application. And 24/7 online consultant service ensure you whatever problem and whenever you meet, you can solve easily. It is easy to operate by anyone with the instructions.
How about the shipment?
The machine will be shipped within 2-3 days after the receipt of your payment.